при получаване
бързо и сигурно (до 2-3 работни дни)
Можеш да върнеш или замениш до 14 дни
Пасивна двулентова тонколона за външен монтаж, устойчива на атмосферни влияния (IP55) - 10" + 1" - 200W RMS
FEATURES
Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
Stainless steel bracket
One 10" high-output LF transducer with 2" voice coil
One RCF Precision 1" Compression Driver with 1.5" voice coil
90° x 40° constant directivity horn
Built in passive crossover and selectable line transformer
10° X 20° enclosure sides for array configurations
Active Mosfet Compression Driver Protection
LICC (Low Impedance Compensated Crossover) network
12 brass suspension points (M8)
ACOUSTICAL SPECIFICATIONS
Frequency Response -10 dB:95 Hz ÷ 20000 Hz
Max SPL @ 1m:124 dB
Horizontal coverage angle:90°
Vertical coverage angle:40°
Directivity index; Q:11
System Sensitivity:95 dB
Nominal Impedance:16 Ω
Power Handling:200 W
Peak Power Handling:800 W
Recommended Amplifier:400 W
Protections:Dinamyc
Crossover frequencies:2000 Hz
TRANSDUCERS
Compression Driver:1" HF driver, 1,5" voice coil
Nominal Impedance:8 Ω
Input Power Rating:25 W AES
Sensitivity:106 dB
Woofer:10" woofer, 2.5" voice coil
Nominal Impedance:16 Ω
Input Power Rating:180 W AES
Sensitivity:95 dB
INPUT SECTION
Input connector:5m, 4-adriges Neopren Kabel
Constant voltage transformer:70/100
Power Selection:70V/30W ,15W , 100V/60W, 30W
CABINET
Cabinet Material:Polyethylene rotomoulded
Hardware:12 x M8 inserts+ U-brackets and pair of spacers
Grille:Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing
Colour:Grey
PHYSICAL SPECIFICATIONS
Height:350 / 13.78 mm/inch
Width:350 / 13.78 mm/inch
Depth:320 / 12.60 mm/inch
Net Weight:13.5 / 29.75 kg/lbs